Activating your FloodSax®
How to energise your FloodSax®
![home-b5-image1-301x300](https://floodsax.ie/wp-content/uploads/2016/01/user-b1-image1-471x309.jpg)
Step 1
Remove outer packaging. Then open the vacuum-sealed bag and remove the FloodSax®.
![home-b5-image1-301x300](https://floodsax.ie/wp-content/uploads/2016/01/user-b1-image2-471x309.jpg)
Step 2
Energise your FloodSax®. This can be done by soaking the FloodSax® with water until they are fully expanded. This should take 2 to 3 minutes.
You can soak your FloodSax® in the sink, a bucket or a wheelbarrow. You can use a hosepipe or watering can. You can use rain water.
How to build your wall of FloodSax®
![home-b5-image1-301x300](https://floodsax.ie/wp-content/uploads/2016/01/user-b2-image1-471x309.jpg)
Step 1
After energising, place one long FloodSax® against the base of the door.
![home-b5-image1-301x300](https://floodsax.ie/wp-content/uploads/2016/01/user-b2-image2-471x309.jpg)
Step 2
Then build a wall on top by vertically overlapping the other energised FloodSax®.
![contact-b1-logo-377x86](https://floodsax.ie/wp-content/uploads/2016/01/flush-logo-footer.png)
![pano1](https://floodsax.ie/wp-content/uploads/2015/02/pano1.jpg)
![pano2](https://floodsax.ie/wp-content/uploads/2015/02/pano2.jpg)
![pano3](https://floodsax.ie/wp-content/uploads/2015/02/pano3.jpg)
![pano4](https://floodsax.ie/wp-content/uploads/2015/02/pano4.jpg)